华为路由器配置实例详细备注讲解

华为28-11路由器配置实例

1、进入系统(进入配置模式)

system

System View: return to User View with Ctrl+Z.

2、为路由器取名与设置密码

[Quidway]local-user huawei

New local user added.

[Quidway-luser-huawei]password cipher huawei #/为配置密码为huawei

3、设置服务类型、安全、访问列表

[Quidway-luser-huawei]service-type telnet #/可以执行远程登入

[Quidway-luser-huawei]level 3 #/设置安全级别

[Quidway-luser-huawei]acl number 2001 match-order auto

[Quidway-acl-basic-2001]rule 0 permit source

[Quidway-acl-basic-2001]rule 1 deny

4、进入接口、并为接口添加IP地址

[Quidway-acl-basic-2001]int ethernet 0/0

[Quidway-Ethernet0/0]ip add .158.58 /端口配置的IP地址为一个IP段

[Quidway-Ethernet0/0]nat outbound 2001

[Quidway-Ethernet0/0]int e 0/1

[Quidway-Ethernet0/1]ip add /端口配置的IP地址为一个IP段

[Quidway-Ethernet0/1]ip route-static .158.57 /为内网的'端口配置静态路由

5、配置DHCP服务器(用来为内网的PC机分配IP地址)

[Quidway]dhcp server forbidden-ip

[Quidway]dhcp server forbidden-ip

6、为DHCP服务器的地址池说明网络地址、子网隐码、网关、DNS

[Quidway]dhcp server ip-pool 1

[Quidway-dhcp-pool-1]network mask

[Quidway-dhcp-pool-1]gateway-list

[Quidway-dhcp-pool-1]dns-list

7、保存命令

[Quidway-dhcp-pool-1]save

The configuration will be written to the device.

Are you sure?[Y/N]y

Now saving current configuration to the device.

Saving configuration flash:/. Please wait...

不明白之处请给位留言……